Old Time Workshop 7mm Decals - Beattie, London

Old Time Workshop 7mm Decals - Beattie, London

Old Time Workshop 7mm Decals - Beattie, London

£9.10


Product Information
Specification

Beattie, London. White shaded red lettering for an RCH 7-plank wagon (with side doors) painted black.

 

For best results these transfers should be applied to a gloss surface.  If a matt finish is required, this may be achieved in a final varnish coat which will also provide greater protection for the model.

How to apply the transfers:-

Clean any grease or oil from the surface and dry thoroughly.  Cut the backing paper to shape around the transfer and dip in lukewarm water for 15-45 seconds to soften the adhesive lubricant.  Do not allow the transfer to float off the backing paper.  Place the backing paper against the model and slide the transfer onto the model.  Final positioning can be achieved using a blunted cocktail stick.  When the transfer is in the correct position, use a cotton bud or tissue to press it down on to the model, removing any bubbles from under it and absorbing any excess water.

 

Product Code7P022
ManufacturerOld Time Work Shop
Stock Level1
ConditionNew



Top